Iimveliso
I-QXME 44; I-Asphalt Emulsifier; I-Oleyl Diamine Polyxyethylene Ether
Iingenelo kunye neempawu
● Ukusasazeka lula.
Le mveliso ilulwelo olupheleleyo, isasazeka lula emanzini kwaye ifanelekile ngakumbi kwizityalo ezikwimigca ethe tye. Iisepha ezixutyiweyo eziqulethe ukuya kuthi ga kwi-20% yezinto ezisebenzayo zingalungiswa.
● Ukunamathela kakuhle.
Le mveliso inika ii-emulsions indawo yokugcina egqwesileyo kunye nozinzo lokumpompa.
● I-emulsion viscosity ephantsi.
Ii-Emulsions ezenziwe nge-QXME 44 zine-viscosity ephantsi, nto leyo enokuba luncedo xa kujongwana neengxaki ze-bitumens zokwakha i-viscosity.
● Iinkqubo ze-phosphorus acid.
I-QXME 44 ingasetyenziswa kunye ne-phosphoric acid ukuvelisa ii-emulsions ezifanelekileyo kwi-micro surfacing okanye kwi-cold mix.
Ukugcinwa kunye nokuphathwa.
I-QXME 44 ingagcinwa kwiitanki zentsimbi yekhabhoni.
Indawo yokugcina izinto ezininzi kufuneka igcinwe kwi-15-30°C (59-86°F).
I-QXME 44 inee-amines kwaye inokubangela ukurhawuzelelwa okanye ukutsha okukhulu kulusu namehlo. Kufuneka unxibe iiglasi zokukhusela kunye neeglavu xa uphatha le mveliso.
Ukuze ufumane ulwazi oluthe vetshe jonga iPhepha leDatha yoKhuseleko.
IIPROPATHI ZOMZIMBA NEZEEKHEMIKHALI
| Imeko yomzimba | Ulwelo |
| Umbala | I-Bronzing |
| Ivumba elibi | I-Amoniacal |
| Ubunzima beMolekyuli | Ayingeni. |
| Ifomula yemolekyuli | Ayingeni. |
| Indawo yokubila | >100℃ |
| Indawo yokunyibilika | 5℃ |
| Indawo yokugalela | - |
| PH | Ayingeni. |
| Uxinano | 0.93g/cm3 |
| Uxinzelelo lomphunga | <0.1kpa(<0.1mmHg)(kwi20 ℃) |
| Izinga lokuphuma komphunga | Ayingeni. |
| Ukunyibilika | - |
| Iipropati zokusasazeka | Ayifumaneki. |
| Iikhemikhali ezibonakalayo | Iimitha ezingama-450 kwi-20 ℃ |
| Izimvo | - |
Inombolo ye-CAS: 68607-29-4
| IZINTO | IINKCUKACHA |
| Ixabiso lilonke le-Amine(mg/g) | 234-244 |
| Ixabiso le-Amine leMfundo ePhakamileyo (mg/g) | 215-225 |
| Ubunyulu(%) | >97 |
| Umbala (uGardner) | <15 |
| Ukufuma(%) | <0.5 |
(1) 900kg/IBC,18mt/fcl.
